- CAT III 600V and CAT II 1000V
- AC and DC Voltage 600V
- AC and DC Current 200mA
- Resistance 20Mꭥ
- Diode Check and Continuity
- Identifies up to 16 cables
- Cuts out “Bell-Out” time
- Transmitter and Receiver included
- Displays the cable number on the large LED display
Description
The MT915 2-in-1 Cable Finder and Multimeter is an amazing tracing system which will save hours instead of Belling-Out any circuit. The MT915 consists of a transmitter & receiver device which enables one person to instantly match up ends of individual cores at either end of a multi-core cable. With the remote kit the meter can test cables installed over long distances either on wall plates or patch panels.
This Cable Finder and Multimeter ensures that the digital multimeter function makes it easy to measure AC Volts, DC Volts, AC and DC Current, Resistance, Continuity and Diode Test.
Specifications
Function |
Range |
Resolution |
Accuracy |
DC Voltage |
200mV – 600V |
0.1mV |
±(1.0% + 3 Digits) |
AC Voltage |
200mV – 600V |
1mV |
±(1.0% + 5 Digits) |
DC Current |
200.0μ A – 200.0mA |
0.1μA |
±(1.5% + 3 Digits) |
AC Current |
200.0μ A – 200.0mA |
0.1μA |
±(1.8% + 8 Digits) |
Resistance |
200.0Ω – 20MΩ |
0.1Ω |
±(1.2% + 3 Digits) |
Overrange Indication |
Yes |
Input Impedance |
>7.5MΩ VDC & >7.5MΩ VAC |
Continuity |
Yes |
Diode Test |
Yes |
Cable Finder |
16 channels; 30KΩ 1.8mA |
Ac Bandwidth |
50Hz – 60Hz |
Digital Display |
2000 |
Min Max |
Yes |
Back Light |
Yes |
Enclosure |
Rubber Holster |
Batteries |
2 x AAA and 9V |
Weight |
308g |
Dimensions |
162 x 74 x 43mm |
Safety Specs |
IEC61010-1 CAT III 600V |
Safety Ratings
Accessories
9V Battery
2 x AAA Batteries
Instruction Manual