Majortech
2-In-1 LAN Tester and Multimeter
2-In-1 LAN Tester and Multimeter
Couldn't load pickup availability
- CAT III 300V and CAT II 600V
- 2-in-1 LAN Tester and Digital Multimeter
- AC and DC Voltage 600V
- AC and DC Current 200mA
- Resistance 20Mꭥ
- LED displays the actual pin configuration and tests the correct pin configuration of 100Base-T, 10Base-T, 10Base-2 Thin Ethernet cable, RJ45/RJ11 modular cables 356A, TIA-568A/568B and Token Ring cable etc
- With remote kit it can remotely test cables up to 300m away either on wall plate or patch panel
- Can test the grounding
- Provides easy to read continuity and fault status display
- Locked Status wiring function
- LAN Testing
- Tests CAT 5 Installations
Description
The MTC50 is a 2-in-1 LAN Tester and Multimeter. This meter is a newly designed and very practical tester that can easily read the correct pin configuration of 10/100 Base-T cable (Category 5), 10Base-2 cable (coax), RJ45/RJ11 modular cables, AT&T 258A, 356A, TIA-568A/568B and Token Ring cable by comparing one transmitting end to the corresponding receiving end. With the remote kit test cables can be installed over long distances either on wall plates or patch panels.
This LAN Tester and Multimeter makes it is easy to verify the cable continuity, open, short and cross-connect. The auto range digital multimeter allows the user to measure AC and DC voltage, AC and DC current, Resistance, Continuity and Diode test.
Specifications
| Function | Range | Resolution | Accuracy |
| DC Voltage | 200mV – 600V | 0.1mV | ±(1.0% + 3 Digits) |
| AC Voltage | 200mV – 600V | 1mV | ±(1.0% + 5 Digits) |
| DC Current | 200.0μ A – 200.0mA | 0.1μA | ±(1.5% + 3 Digits) |
| AC Current | 200.0μ A – 200.0mA | 0.1μA | ±(1.8% + 8 Digits) |
| Resistance | 200.0Ω – 20MΩ | 0.1Ω | ±(1.2% + 3 Digits) |
| Overrange Indication | Yes | >7.5MΩ VDC & >7.5MΩ VAC | |
| AC Bandwidth | 50Hz-60Hz | ||
| Continuity | Yes | ||
| Diode Test | Yes | ||
| Digital Display | 2000 | ||
| Lan Tester | RJ45 and RJ11 + BNC | ||
| Min Max | Yes | ||
| Back Light | Yes | ||
| Enclosure | Rubber Holster | ||
| Batteries | 2 x AAA and 9V | ||
| Weight | 308g | ||
| Dimensions | 162 x 74 x 43mm | ||
| Safety Specs | IEC61010-1 CAT III 600V | ||
Safety Ratings
Accessories
Carrying Case
9V Battery
Test Leads
Instruction Manual
