Majortech
200A AC True RMS Clamp Meter
200A AC True RMS Clamp Meter
Couldn't load pickup availability
- CAT IV 600V and CAT 1000V
- 6000 count LCD display
- AC and DC Voltage 1000V
- AC Current 200A
- Resistance 60Mꭥ
- Capacitance 4mF
- Open Jaw Sensor
- Ø16mm Cable Clamp size
- NCV – Non-Contact Voltage Detector
- Low input impedance prevents false readings due to “Ghost” voltage (LowZ)
- Built-In Flashlight
- Continuity buzzer and Diode Test
- Min/Max and Data Hold function
- Auto Power Off
Description
The MT715 is a CAT IV 600V, 6000 count, True RMS 200A AC digital clamp meter with a large backlit LCD display and clamp jaw opening of 16mm. This open jaw clamp meter is designed to assist in the ease of measuring current in crowded or tight cable areas, as the jaws need only be pushed over the wire to obtain accurate readings. The meter measures 1000V AC/DC, capacitance, and resistance and features a Min/Max mode. The LowZ range function has a low pass filter to eliminate errors caused by “Ghost” voltages. Other features include Non-Contact Voltage detection, diode test function, a continuity buzzer, and a built-in flashlight. Housed in a modern double moulded rubber housing with a rugged design for heavy duty use.
Specifications
| Function | Range | Resolution | Accuracy |
| AC Current | 200A | 100mA | ±(3% + 5 Digits) |
| DC Voltage | 6.000V – 1000V | 1mV | ±(1.0% + 2 Digits) |
| AC Voltage | 6.000V – 1000V | 1mV | ±(1.2% + 2 Digits) |
| Resistance | 600.0Ω – 60.00MΩ | 0.1Ω | ±(1.5% + 4 Digits) |
| Capacitance | 60.00nF – 4mF | 0.01nF | ±(3.0% + 5 Digits) |
| True RMS Measurements | ACV, ACA | ||
| AC Bandwidth | 2KHz | ||
| Digital Display | 6000 | ||
| Non-Contact Voltage (NCV) | Yes | ||
| Overrange Indication | Yes | ||
| Continuity | Yes | ||
| Diode Test | Yes | ||
| Jaw Size | 16mm Open Jaw | ||
| Input Impedance | >10MΩ DCV & >10MΩ VAC | ||
| Min Max | Yes | ||
| Data Hold | Yes | ||
| Back Light | Yes | ||
| Enclosure | Double injection moulding | ||
| Low Battery Indication | Yes | ||
| Batteries | 2 x AAA | ||
| Weight | 259g | ||
| Dimensions | 230 x 44 x 66mm | ||
| Safety Specs | IEC61010-1 CAT IV 600V | ||
Safety Ratings
Accessories
Test Leads
Carrying Case
2 x AAA Batteries
Instruction Manual
- Fastest Calibration Service in Australia as fast as 24 Hrs Hight Priority
- Best In-House and On-Site Calibration Service in Entire Australia
- Smart Software based Calibration Service to reduce human error and improve uncertainty
- Mobile Calibration Service to reduce downtime and improve productivity
- ISO 17024 NATA Accredited Calibration Service
