- CAT III 300V and CAT II 600V
- The transmitter measures External voltage Range from 12V to 400V AC/DC
- Transmitter Output Signal 125 kHz
- Transmitter External Voltage Dielectric Strength Max 400V AC/DC
- Receiver Cable Locating Mode Single Pole 2 Meter
- Receiver Cable Locating Mode Dual Pole 0.5 Meter
- Receiver Cable Locating Single Loop Line up to 2.5 Meter
- Detects cables, electrical wire, water/gas supply pipelines concealed in walls and ground
- Detects interruptions and short circuits in cables and concealed electrical wire
- Tracing sockets and distribution sockets having accidentally been covered by plastering
- The screen of transmitter displays present transmitting power, transmitted codes and voltage
- Transmitter has self-inspection displaying status on LCD
- Both transmitter and receiver have flashlight function
- Output signal 125kHz
- Detects interruptions and short circuits in floor heating
- The LCD of receiver displays present transmitting power, transmitted codes and voltage
- The sensitivity of the receiver can be adjusted manually or automatically
- The receiver can sweep frequency automatically
- Identifies fuses and assigned current circuits
- Mute mode can be set for both the transmitter and receiver
- Auto Power Off
- Additional transmitters are available to extend or verify several functions
Description
The MT195 Cable Locator is the ideal tool to detect electrical power cables, communication cables, metal pipes and much more during construction, maintenance, or renovation. Pinpoint pipes and cables in walls or underground with precision by identifying the corresponding signal number sent by the transmitter. The transmitter and receiver with their advanced digital circuit technologies ensures a highly stable and reliable performance. The transmitter not only sends signals but can be used as an AC/DC voltmeter displaying the voltage on the tested line. When testing on electrical circuits, the receiver can quickly identity circuit breakers in the distribution board of the circuit the transmitter is connected to or visa versa. The receiver displays the value of the signal measured and it can be used to check short circuits or breaks on existing installations, ideal for underfloor heating systems.
This Cable Locator set is lightweight and is supplied with a complete set of accessories for direct measurement.
Specifications
Function |
Range |
Accuracy |
Transmitter functions |
Output Signal |
125kHz |
|
External Voltage Range |
DC 12-400V |
±2.0% |
AC12-400V (50/60Hz) |
±2.5% |
Display |
LCD, with function display and column chart |
|
External Voltage Dielectric Strength |
Max. 400V AC/DC |
|
Batteries |
9V |
|
Weight |
420g |
|
Dimensions |
190 x 89 x 43mm |
|
Receiver functions |
Depth of Tracking |
Depth depends on the material specific applications |
|
Cable Locating Mode Single Pole |
About 0 – 2meters |
|
Cable Locating Mode Dual Pole |
About 0 – 0.5meters |
|
Cable Locating Single Loop Line |
Up to 2.5meters |
|
Display |
LCD, with function display and column chart |
|
Batteries |
6 x AAA |
|
Weight |
350g |
|
Dimensions |
242 x 78 x 39mm |
|
Safety Specs |
CAT III 300V |
Safety Ratings
Accessories
Carrying Case & Shoulder Strap
Test Leads
Test Probe
Croc Clips
Grounding Rod
Batteries
Instruction Manual