Skip to product information
1 of 1

Majortech

Electric Vehicle Supply Equipment Adaptor

Electric Vehicle Supply Equipment Adaptor

Regular price $742.50 AUD
Regular price Sale price $742.50 AUD
Sale Sold out
Tax included. Shipping calculated at checkout.
View full details
  • Testing adaptor for Mode 3 supply equipment
  • EV connection for Type 2 and Type 1
  • Measuring terminals L1, L2, L3, N and PE
  • Mains socket for connection to check an external load
  • Single phase system with Max input voltage up to 250V
  • Three phase system with Max input voltage up to 430V
  • Separate phase indication by three LED lamps to indicate voltage present PE-Pre-test function
  • Simulation of CP Error “E” and PE Error (Earth Fault)
  • Rotary dials simulate PP State or CP State

Description

The MT290 Electric Vehicle Supply Equipment Adaptor is an extender for interfacing EVSE to test the socket of an installation tester for verification of electrical safety and function of all single and three phase EV charge points. This easy-to-use instrument, used in conjunction with the MT390 or similar meter offers an electrical contractor a universal tool designed to thoroughly test Mode 3 AC Electric Vehicle charging stations. The adaptor is designed to simulate the connection of an electric vehicle to an under-test charging point, with the safety feature of the PE Pre-Test, the PE conductor can be tested for possible presence of dangerous voltage against earth. A rotary switch for the Proximity Pilot (PP) state “Cable Simulation” can simulate various current capabilities of charging cables, while the rotary switch for Control Pilot (CP) state “Vehicle Simulation” can select and simulate various charging states.

This electric vehicle supply equipment adaptor measurements on live conductors can be undertaken by either using the front mounted mains socket or the 4mm measuring terminals of L1, L2, L3, N and PE of the EVSE adaptor. Standard accessories include the Type 2 and Type 1 plugs complete with a hard carrying case. The housing of the MT290 IP54 for dust and splash proof water protection.

Specifications

Function Range
Input Max Single Phase System 250V
Input Max Three Phase System 430V, 50/60Hz,
Input Max 10A200.0mV – 600V
EVC-200 Connector AC charging mode 3. Suitable for Type 2 wall top contact or fixed cable with vehicle connection (type 2 7P operation phase)
EVC-100 Connector AC charging mode 3. Suitable for Type 1 with vehicle connection (type 1 5P single-phase)
PE Pre-Test Yes

 

open (Error condition or disconnection of plug)

13A Coding for maximum current of the EV cable

PP Stimulation 20A

 

32A EVSE is connected and can operate in any,

63A of these coding position.

CP Stimulation states A (EV disconnect),

 

states B (EV connected),

states C (EV charged without ventilation),

states D (EV charged with ventilation)

CP Error “E” On (CP short to PE via diode / off
PE Error On (PE error) / off
Size 227 x 115 x 60mm
Weight 832g (without connection cables)

Accessories

MT290
Hard Carrying Case
Instruction Manual

We offer expert Calibration Service Australia Wide
  • Fastest Calibration Service in Australia as fast as 24 Hrs Hight Priority
  • Best In-House and On-Site Calibration Service in Entire Australia
  • Smart Software based Calibration Service to reduce human error and improve uncertainty
  • Mobile Calibration Service to reduce downtime and improve productivity
  • ISO 17024 NATA Accredited Calibration Service