- Certified in accordance with the ATEX directive EX II 2 G Ex ib op IIB T4 Gb CAT IV 1000V
- IP67 waterproof and dust proof
- Intrinsically Safe
- AC Voltage 1000V
- Thinner probe tip for working with socket outlets
- Green LED means Power on, flashing red LED with beeper means Voltage detected
- Two modes, green indicates high voltage mode, Yellow LED 12V Mode
- Flash and beep rate increases as the detector gets closer to the voltage.
- Power On/Off with silent mode
- 2m drop-proof
- Build-in Flashlight
Description
The MT405EX is an intrinsically safe NCV Voltage Detector for use in potential explosive environment. The MT405EX is certified in accordance with the ATEX directive EX ll 2 G EX ib op llB T4 Gb in Zones 1 and 2. The NCV voltage detector has a dual range, a low measuring range down to 12 volts and a high measuring range from 12V to 1000V. Suitable for outlets or against wire insulation testing, this non-contact AC Voltage Detector has a switch to turn the unit on and a Green LED indicates it is working. There is a Red LED, an audible sound as well as a vibration to indicate the presence of voltage. It has a rugged double moulded IP67 waterproof housing that can withstand a 2m drop. There is a bright built-in LED flashlight ideal for use in dimly lit areas.
Specifications
Function |
Range |
Power On Indicator |
Green LED |
Flashlight |
LED |
Non-Contact Voltage (NCV) |
Yes |
AC Voltage |
12V – 1000V |
Frequency |
50/60Hz |
Voltage Detector 100V -1000V |
Red LED auditable beep |
Voltage Detector 12V -1000V |
Yellow then Red LED audible beep |
Voltage Detector Audible |
Continuous Beep |
Enclosure |
Double moulded IP67 waterproof |
Low Battery Indication |
Self-test |
Batteries |
2 x AAA |
Weight |
55g |
Dimensions |
160 x 23 x 25mm |
Safety Specs |
IEC61010-1 CAT IV 1000V |
Intrinsically Safe |
EX II 2 G EX ib IIB T4 Gb in Zones 1 and 2 |
Safety Ratings
Accessories
2 x AAA Batteries
Instruction Manual