- Analysing of Voice, Data and Video cables
- Tests shielded twisted pair (STP), unshielded twisted pair (UTP) and coaxial cables.
- Detects shorts, opens, reversed polarity, crossed and split pairs
- 5 Data RJ45 Remote Identifiers, 5 Coax F-Connector Remote Identifiers
- Generates three distinct, selectable digital tone patterns for cable tracing and trouble shooting
- Flashing Voltage warning alerts user of unidentified hazardous voltage
- Simple cable identification of patch panel or wall outlet port
- Low Battery indication and Auto Power Off
- PASS or FAIL indication of correct or error in wiring
- Large LCD backlit display
Description
The MT902 is a professional VDV Wire Tester that analyses patch leads on phones, computer networks and coax cables in one easy step. This portable Voice, Data and Video meter is used to verify and troubleshoot RJ11, RJ12, RJ45 and F-connector cable. Indication on the large LCD display will map out and indicate open faults, short faults, split pairs and reverse wiring together with icons of PASS and FAIL status. The MT902 comes standard with 5 RJ45 Data and 5 Coax F-Connector identification remotes that can be used by technicians to permit mapping as well as identify cable runs from patch panels to a wall outlet ports.
This VDV Wire Tester has a built-in tone generator that can be used to locate cables in wiring closets and patch panels by using an optional amplifier probe. Housed in a rugged double moulded case will provide years of reliable service.
Specifications
Function |
Range |
Cable Types |
Shielded or Unshielded Cat7, Cat7A, Cat6, Cat6A, Cat5, CAT5A, Cat4Cat3, coax |
Voice Tests |
RJ-11/12 6-wire cables |
Data Tests |
RJ-45 8-wire cables |
RJ-45 Remote |
5 Remote mapping locations |
Video Tests |
F-connector coax cables |
Tone |
Use of Tone generator to trace phone lines |
Digital Display |
2.4-inch TFT colour screen |
Maximum Coax Cable Length |
305m |
Minimum for Split Pair Detection |
0.5m |
Maximum Coax Cable Resistance |
100Ω’s maximum DC |
Max Voltage between any Two pins no damage |
60V DC or 55V AC |
Back Light |
Yes |
Enclosure |
Moulded casing |
Low Battery Indication |
Yes |
Batteries |
2 x AA |
Weight |
230g |
Dimensions |
152 x 61 x 34mm |
Safety Specs |
EN 61326 |
Accessories
RJ45 Remote ID’s
F-Connector Remote ID’s
Voice & Data Jack Adaptor
Data Patch Cable
Coax Patch Cable
Telephone Patch Cable
2 x AA Batteries
Instruction Manual
We offer expert Calibration Service Australia Wide
- Fastest Calibration Service in Australia as fast as 24 Hrs Hight Priority
- Best In-House and On-Site Calibration Service in Entire Australia
- Smart Software based Calibration Service to reduce human error and improve uncertainty
- Mobile Calibration Service to reduce downtime and improve productivity
- ISO 17024 NATA Accredited Calibration Service